• Email lygxfwy@163.com
  • Call us now +86 0379-64337252
GET A QUOTE

Anode aluminum foil board

Anode aluminum foil board

keywords : Aluminium Foil
Model : -
Price : -

Additional Information

Anode aluminum foil board Description 1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects. 2. The end face of the foil roll should be plain, no edge warping and bruise. 3. Splices will be ultrasonically welded and well visible marked at the flange a couple of layers before the joint. Strength of the weld at the seam to be min. 80% of the foil strength. 4. The uncoiling length in the adhesion experiment: the uncoiling length is less than1.0 m. Thickness:0.01-0.025mm Alloy: 070-H18/1060-H18/1235-H18 Width:300-1000mm Core:76mm steel core Property:tensile strength≥170MPa,elongation ≥1.5% Surface wetting tension: ≥33dyne

Anode aluminum foil board
Description
1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects.
2. The end face of the foil roll should be plain, no edge warping and bruise.
3. Splices will be ultrasonically welded and well visible marked at the flange a couple of layers before the joint. Strength of the weld at the seam to be min. 80% of the foil strength.
4. The uncoiling length in the adhesion experiment: the uncoiling length is less than1.0 m.
Thickness:0.01-0.025mm
Alloy: 070-H18/1060-H18/1235-H18
Width:300-1000mm
Core:76mm steel core
Property:tensile strength≥170MPa,elongation ≥1.5%
Surface wetting tension: ≥33dyne

Get in Touch with Us

Let us know your requirements and queries for a detailed reply