• Email lygxfwy@163.com
  • Call us now +86 0379-64337252
GET A QUOTE

Cold Stamping mould Pharma Foil

Cold Stamping mould Pharma Foil

keywords : Aluminium Foil
Model : -
Price : -

Additional Information

Cold Stamping mould Pharma Foil Description 1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects. 2. The end face of the foil roll should be plain, no edge warping and bruise. 3. Splices will be ultrasonically welded and well visible marked at the flange a couple of layers before the joint. Strength of the weld at the seam to be min. 80% of the foil strength. 4. The uncoiling length in the adhesion experiment: the uncoiling length is less than1.0 m. Thickness: 0.037-0.065mm Alloy /temper: 8021-O Width: 300-1100mm Core: 76mm Property: tensile strength 80-100MPa, elogation≥15%, Erichsen value≥7mm Surface wetting tension: mist spray  A grade

Cold Stamping mould Pharma Foil
Description
1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects.
2. The end face of the foil roll should be plain, no edge warping and bruise.
3. Splices will be ultrasonically welded and well visible marked at the flange a couple of layers before the joint. Strength of the weld at the seam to be min. 80% of the foil strength.
4. The uncoiling length in the adhesion experiment: the uncoiling length is less than1.0 m.
Thickness: 0.037-0.065mm
Alloy /temper: 8021-O
Width: 300-1100mm
Core: 76mm 
Property: tensile strength 80-100MPa, elogation≥15%, Erichsen value≥7mm
Surface wetting tension: mist spray  A grade

Get in Touch with Us

Let us know your requirements and queries for a detailed reply